• google scholor
  • Views: 1055

  • PDF Downloads: 0

A Review on Comparison of Different Water Leak Detection Techniques Suitable for Indian Scenario

Dipesh H. Dalal1 and Rupesh P. Vasani2

1 Department of Civil Engineering, Gujarat Technological University, Ahmedabad, Gujarat India

2 Department of Sal Education Campus, Gujarat Technological University, Ahmedabad, Gujarat India

Corresponding author Email: dhdalalphd7@gmail.com

DOI: http://dx.doi.org/10.12944/CWE.17.2.3

Effective management of water distribution is necessary for any country worldwide by reducing water losses during different utility operations. Also in India, water loss is the biggest challenge for the municipalities and local bodies of various states. Different researchers had tried to give attention to this issue and its effective solution through different techniques. In this research paper a summarization of different methods used to identify and locate the leakage with its merits and demerits was given. A review of different leak detection techniques from randomly selected research papers in the form of a comparison table considering suitability, methodology, outcomes, and limitations by different researchers suitable for the Indian scenario was also presented. In the end, an effort was made to emphasize the selection of the appropriate method for leak detection and localization of leakage suitable for Indian conditions.

Leakage; Leakage Detection; Water Distribution Network; Water losses

Copy the following to cite this article:

Dalal D. H, Vasani R. P. A Review on Comparison of Different Water Leak Detection Techniques Suitable for Indian Scenario. Curr World Environ 2022;17(2). DOI:http://dx.doi.org/10.12944/CWE.17.2.3

Copy the following to cite this URL:

Dalal D. H, Vasani R. P. A Review on Comparison of Different Water Leak Detection Techniques Suitable for Indian Scenario. Curr World Environ 2022;17(2).


Download article (pdf)
Citation Manager
Publish History


Article Publishing History

Received: 05-04-2022
Accepted: 24-05-2022
Reviewed by: Orcid Orcid Dr. Chuck Chuan
Second Review by: Orcid Orcid Dr. Hudhaifa AL-Hamandi
Final Approval by: Dr Gopal Krishan

Introduction

We know water is one of the important gifts given to mankind from nature. Water is the source of happiness, wealth, and prosperity in the daily life of mankind. There are limited available resources of water in the different parts of the world, India is one of them and a decrease in the quantity of it spreads scarcity to the users1. Developing countries like India, China, countries of Africa, and Bangladesh have expected more water scarcity as compared to other countries with the consideration of population growth and migration towards major cities of countries2.    To fulfill this, every major city of India expands its distribution network concerning an increase in water supply demand due to the growth of population as well as the development of the new area in different directions of the cities. In India, around 19% of water is consumed by industries, while around 70% of water is utilized by farming or agriculture2. This will result in the need for effective distribution of water throughout the whole country. The demand of water is expected to increase in the future in India and the projected demand for water exceeds 50% by 2030 and around 600 million peoples of India face water shortage  resulting in 2,00,000 loss of life every year from inadequate access to drinking water3. So, the gap between the demand of users to the sources of water supply increasing rapidly in India and in this situation, water conversation, and reduction of water leakage in distribution pipe networks need to be importantly studied 4. India is one of the  developing country and the loss of water in a domestic sector with consideration of leakage is nearly 30% to 40% of the total flow during distribution of water through pipe network.5. Losses in the distribution of water have a great economic impact on the Gross Domestic Products (GDP) of the country. So, an effective methodology or solution for the better management of the water distribution of the network by minimizing losses will be a great relief to a nation like India, which faces the problems of losses of water from a large network of pipes and difficulties to maintain and operate the water distribution network efficiently without any loss of water.  In India, the design of pipelines for distribution is based on Continuous Water Supply (CWS) guidelines, and the operational work for the distribution of water is done as per the Intermittent Water Supply (IWS)6. The main cause of water losses is leakage developed in different components such as distribution pipes, transmission pipes, pipe connections, pipe joints, valves, hydrants as well as the whole distribution system during water distribution operations. The estimated loss due to leakage is considered 70% of total loss in water distribution networks, especially in underground pipelines7. Leakage is mainly due to pipe material defects, pipe aging, corrosion, design fault in installation, traffic movement above the pipeline, etc8. The basic economic loss due to leakage is the raw water treatment cost and its transportation cost including erosion of bedding under pipe, pipe breakage, and the foundations of buildings and roads nearby pipes. Therefore, designing a cost-effective solution to identify and locate the leakage is quite needful for all the smart cities of India in the upcoming days for effective management of the distribution of water through a network of pipes. Here in this research paper, an effort was carried out to draw attention to the suitability and comparison of different leak detection techniques suitable for the Indian scenario. In section 2, the classification, instrumentations, merits, and demerits of different leak detection techniques were presented. While in section 3, a review of different research in the form of a comparison table with review methodology was given. At the end of a research paper, a discussion based on the literature studied was presented with a conclusion.

Different Leak Detection Methods

There are many different methods adopted by researchers to detect leakage in the water distribution pipe network are Underground Wireless Sensor Network (U.W.S.N.), intelligent sensing and use of Information and Communication Technology (ICT), acoustic detection with noise logger and leak noise correlator, use of hypothesis and algorithm, use of thermal image with Infrared (IR) high-resolution camera, use of Ground Penetrating Radar (GPR), geophysical technique, hydraulic modeling, fiber optic monitoring, tracer gas, multi-model systems and many more. Generally, all smart cities of the developed and developing country of the world have an underground piping network for the distribution of freshly treated water among the city to maintain the beautification the city. So, it is very difficult to find the position of leakage as well as do effective management in the distribution of water without making any losses. If any method is available to find the approximate location of leakage in the pipe network, that will be a great relief to the local municipalities bodies to do repair work in time as well as save the quantity of freshly treated water which is ultimately wasted due to leakage.  In this review paper, different methods for the effective management of loss of water are listed and the merits and demerits of each technique are given in section 2. While in section 3, the summary of the research work from randomly selected research papers was presented.  At the end, discussion based on the review papers with the concluding part for the suitability or selection of proper technique of leak identification was given for a developing country like India.


Classification of methods

Leak detection methods can be classified based on instrumentations, objectives, sensors, techniques, flow parameters, and analysis with modeling from the collected data.  

Static and Dynamic method of leak Detection

In a static method of leak detection, there is a use of different data collectors and different sensors that are placed within the water distribution network to collect different flow parameters. From the analysis of this data, there is a prediction of leakage from any remote place. These systems are said to static leak detection because all the instrumentation is static and on the predefined location of the network. While in dynamic method of leak detection, we have to depend on the dynamic leak devices that can be moved throughout the entire possible leakage zone. Movement of such devices depend on any previous data of leakage. The main difference between static and dynamic leak detection systems is that in static method of leak detection, it is based on analysis of data and leakage identified immediately with some accuracy. While in dynamic method of leak detection, we have to rely on the information of leak possibilities or past data of leakage. Also, the dynamic method give approximation location of leakage as well as it is time-consuming as compared to static method of leak detection9.

Acoustic and Non-Acoustic leak detection

In the acoustic leak detection system, measures the sound generated by leakage with the use of different acoustic devices such as listing rods, ground microphones, noise loggers, aqua phones, geophones, etc. In this method, heavy instrumentation is required and placement of such devices in the pipeline is another issue. Also, the small leakage in the pipe, which generates very little noise has not been detected effectively.  Localization of the leak is also difficult with the use of this type of devices, which are placed far from the actual position of leakage.  While, in the non-acoustic method there is a use of different sensors to monitor flow, pressure, temperature, vibration, etc., to collect the data, and then after different modelling and algorithms techniques have been used to analyze such data.  As there is a collection of different flow parameters with the help of sensors in this method, small or minor leakage is also identified and localization of leakage can also be done by the analysis of such data.

Traditional and Modern leak detection

Traditional methods used for decades to find leakage such as physical monitoring of pipes, use of robots in the pipeline, acoustic methods, use of thermal images, etc. Heavy instrumentation is required in these methods and very difficult to use in the case of underground pipe networks. While in modern techniques, there is a use of different types of sensors to collect data with the platform of ICT or Internet of Thing (IoT), and analysis of the collected data has been done using different algorithms and modeling techniques. In modern techniques, leakage can be identified and localized from any remote place while with the use of traditional methods there may be physical visits made through a complex pipe network before or after.  Use of traditional methods required more manpower as compared to modern technique.  

Comparison of different leak detection methods

Many methods are available to detect leakage in pipe networks but practically before implementation of any method in the real scenario the laboratory experiments, analysis of data, and validation of the output must be carried out to check the effectiveness of the method in particular conditions. With the above consideration, the advantages and disadvantages of different methods with the instrumentation are summarized below in table 1 for the comparison and appropriate choice of leak identification method in the related case.

Table 1: List of Different Leak Detection Techniques.

Leak detection method

Instrumentation

Merits

Demerits

Wireless Sensor Network method (W.S.N)10

 Flow Sensor, Pressure Sensor, Temperature Sensor, Humidity Sensor, Vibration Sensor,

pH Sensor Microcontroller, Cloud network, etc.

  • Very effective in leakage identification from real-time data.
  • Effective in localization of leakage.
  • Remote monitoring.
  • Required less manpower.
  • Also, able to monitor by the end-user.
  • With the use of different types of sensors all flow parameters observed and contamination can also predict if a pH sensor is included.
  • Effectively used in all-weather conditions as well as in all types of topographic conditions.
  • Optimization of several sensors and placement of sensors is very difficult.
  • After collection of all data, to analyze and prediction of leakage from collected data there is a need for an algorithm or modeling or machine learning technique.
  • Based on internet connectivity so better network required
  • Power consumption is more in some types of sensors.
  • Sometimes give false alarm.
  • Initial implementation cost is high.
  • Skill required for initial setup of sensor technology.

Acoustic method11

listing rods, ground microphones, noise loggers, aqua phones, Electrical & Mechanical Geophones, and Hydrophones.

  • Accurate leakage identification and localization within the range of devices.
  • Cheap to purchase.
  • Easy in installation.
  • Most suitable in metallic pipelines.
  • Provide fast onsite leak detection.
  • Low maintenance and low replacement battery cost.

 

  • Hydrophones are costlier than geophones.
  • Heavily rely on human sense.
  • For real-time monitoring cost is very high.
  • Unable to identify the exact location of the leak without correlators.
  • Less accurate while pipelines are placed on a surface with a noisy environment.

 

 Thermal Images with Infrared camera9

Thermography Camara / Infrared Camara

  • Effective in the case of surface pipelines.
  • Not affect the traffic and population.
  • Independent of pipe material, size of pipe, and network of pipelines.
  • Can be used day or night time.
  • Not reliable in the case of damaged pipelines.
  • Not all-weather techniques as on rainy days it is not useful.
  • Groundwater table influences the use of IR cameras.
  • Rotating the speed of the camera and the speed of the vehicle affects the actual result.

Ground Penetration Radar (GPR)9

Radar system

  • Detect leakage independently irrespective of type of material used for pipe, and the size of the pipe.
  • Does not require a skilled person
  • Require access for the road, which is above the pipeline.
  • Disturbance for traffic while the inspection is going on.
  • Depend upon pipeline bedding and surrounding condition
  • Instrumentation is costly.

Tracer Gas9

-

  • Suitable for all types of pipe material.
  • Effective in the surface pipeline because the gas which is lighter than air is used.
  • Good for small-size pipelines.
  •  
  • Not conventionally used in larger pipelines
  • For detection of leakage in a particular pipeline, the flow of water in another pipeline should be blocked. Hence, interruption of service.
  • Not suited for buried pipelines.

Hydraulic Modeling

-

  • All flow parameters can be a measure
  • Effective in leak identification
  • Different scenarios can be created
  • Calibration of the model is required
  • Collection of real data required for validation.

Fiber Optic Monitoring12

-

  • A large number of nodes can be covered with a single fiber
  • Less maintenance and operating cost
  • Effectively used in less power zone or industrial zone. 
  • Used in all-weather conditions.
  • Physical parameters like temperature and pressure can affect the performance of fiber optic.
  •  

Genetic Algorithms (GA)

Algorithm model

  • Less time consuming
  • More efficient than the conventional method
  • Once the system is established very cost-effective.
  • Simulation of different cases is possible.
  • Different algorithm models used by different researchers.
  • Validation of model required before implementation in a real scenario.
  • Depend on the data given by sensors.
  •  

Artificial Neural Network (ANN) method

-

  • Quick identification of leakage possible from the collected data.
  • Accuracy can be increased by adopting different approaches in ANN
  • Without accurate simulation, it gives a false result
  • Skill person required to develop the neural network as per the case.

 

Literature review

The literature review presented here was based on the research papers published in peer-reviewed journal in the field of effective management of water losses, observation or monitoring of different flow parameters during distribution of water in pipe network, leakage detection in the water distribution network, and some cases studies of leakage identification. Different search strings were used to search research articles like “Losses in the water distribution network in India”, “Leakage identification in the distribution network in Indian condition” and “Water scarcity in India”.  Numbers of papers were found addressing the losses of water and leakage detection methods in the Indian scenario as well as in other developing countries as the problem was an older one. In this review paper, recent research papers published from the year 2014 to 2021 were considered. A detailed reading of the abstract and conclusion was done to classify and compare the articles based on analysis, method, and instrumentation used, Suitability in a particular condition, outcomes, and limitation of the research work. A detailed comparison of the above-stated points of the most recent research work randomly selected from the collected research papers was presented here in table 2. The limitations of the research work also presented to select the appropriate methods among the available methods in particular conditions. India has a wide range of variations in the distribution network of pipes based on topographical conditions, geographical conditions, the layout of the pipe network, different water supply systems, water source location, water demand in different sectors, and pipe size. So, the choice of a leakage detection system may be different in different conditions. A detailed discussion on this was given after this section for better implementation of a suitable method of leakage detection to minimize the losses of water.
 

Table 2: Summary of review papers

Click here to view Table


Discussion

The Government of India (GOI) launched the mission ‘Smart Cities in India’ in 2015 for 100 cities within the country. To become a smart city GOI decided on many parameters, adequate water supply is one of them. So, there is a great chance to implement or introduce any techniques which result in effective management of loss of water during distribution through a complex and huge piping network. As found from the review of research papers there are many methods to identify the leakage and localize the leakage to reduce losses resulting in better management of water distribution. Water leakage is found using acoustic devices in developed countries based on vibration or sounds generated by the pressurized pipe, While in developing countries major leaks are found only when they appear on the surface of roads in case of underground pipe network which is resulting in a considerable amount of wastage of water 5. From the review of research papers, it was found that in earlier days acoustic method is mostly used in developed countries for leak detection but nowadays the use of IoT, wireless sensors, machine algorithms, and neural network techniques have increased as compared to the traditional method. As there are many existing leak detection techniques the selection of a proper leakage identification method will depend on many parameters such as flow parameters, pipe aging, the distribution network of pipes, pipe material, full supply or intermittent supply, size of pipe, underground network, surface network, water source, fund allocation, awareness of local bodies, etc. It is very difficult to select and rely on any method because effectiveness in individual cases may be different from case to case. Different research work is carried out by many researchers in this direction and as a result, the implementation of any leakage detection method depends on many parameters as each method has its own merits and demerits. The comparison of different research work carried out recently shows there is different instrumentation is needed for each method. In India, most of the cities supply the water with IWS systems that means less than 24 hours per day resulting in distribution with pressure. So, major parts of India have underground pressurized pipe networks for the distribution of drinking water.  In this situation, the leakage detection method which depends upon the flow parameters that are flow and pressure give better result as compared to the methods which are used for the CWS system. Also, we have to see the feasibility of the implementation of different instrumentation for different methods in the already developed underground water distribution network of the city without disturbing the supply of water.

Conclusion

From the study and comparison of different methods and looking at the fact that in the Indian scenario most of the cities have IWS systems with pressurized pipes in underground water distribution networks, the Wireless Sensor Network (WSN) technique is more suitable with the use of IoT in most of the cases for identification of leakage. WSN technique is the latest and most modern technology to detect leakage in the pipelines as compared to the traditional method and it has many advantages which overcome the limitations of other methods. To locate the leakage, we have to use mathematical modeling or machine learning algorithms or use of any artificial intelligence technique from the collected data by wireless sensors. The advantage of using a wireless sensor network is its suitability in any situation, fewer instrumentations require, the system once established can be used for a long time, and collection of data from sensors can be done from any remote place. This system could be easily implemented in the already established water distribution network. However, more research work should be carried out to implement WSN technique effectively in terms of an optimum number of sensors, cost of the sensor, the accuracy of the sensor, placement of the sensor, method for analysis of data received by sensors, effectiveness in a real scenario, and validation of simulation of the model.


Acknowledgment 

I acknowledge my Parents, wife Ankita, and My lovely daughters Nemi and Priya for the support and inspiration.

Conflict of Interest

There is no conflict of interest

Funding Sources

There is no funding sources.

References

  1. Surendra HJ, Suresh BT, Ullas TD, Vinayak T, Hegde VP. Economic design of alternative system to reduce the water distribution losses for sustainability. Appl Water Sci. 2021;11(7):1-9. doi:10.1007/s13201-021-01460-y
    CrossRef
  2. Gupta A, Mishra S, Bokde N, Kulat KD. Need of smart water systems in India. 2016;11:2216-2223.
  3. Chakraborti RK, Kaur J, Kaur H. Water Shortage Challenges and a Way Forward in India. J Am Water Works Assoc. 2019;111(5):42-49. doi:10.1002/awwa.1289
    CrossRef
  4. Anjana GR, Sheetal Kumar KR, Mohan Kumar MS, Bharadwaj A. A Particle Filter based leak detection technique for water distribution systems. In: Procedia Engineering. Vol 119. Elsevier Ltd; 2015:28-34. doi:10.1016/j.proeng.2015.08.849
    CrossRef
  5. Gopalakrishnan P, Abhishek S, Ranjith R, Venkatesh R, V JS. Smart Pipeline Water Leakage Detection System. 2017;12(16):5559-5564.
  6. Ghorpade A, Sinha AK, Kalbar PP. Drivers for Intermittent Water Supply in India: Critical Review and Perspectives. Front Water. 2021;3(September):1-15. doi:10.3389/frwa.2021.696630
    CrossRef
  7. Schwaller J.  van ZE. Modellig the pressure-Leakage Response of water distribution systems based on individula leak behavior. J Hydraul ENGG. Published online December 8, 2015:04014089-1-04014089-8.
    CrossRef
  8. Osama Hunaidi AW. “A new system for locating leaks in urban water distribution pipes.” EMERALD INSIGHT,Management Enviornmental Qual An Int Journal,. 2006;17(4):450-456.
    CrossRef
  9. El-Zahab S, Zayed T. Leak detection in water distribution networks: an introductory overview. Smart Water. 2019;4(1). doi:10.1186/s40713-019-0017-x
    CrossRef
  10. JayaLakshmi M, Gomathi V. An enhanced underground pipeline water leakage monitoring and detection system using Wireless sensor network. In: 2015 International Conference on Soft-Computing and Networks Security (ICSNS). ; 2015:1-6. doi:10.1109/ICSNS.2015.7292399
    CrossRef
  11. Khulief YA, Khalifa A, Mansour R Ben, Habib MA. Acoustic Detection of Leaks in Water Pipelines Using Measurements inside Pipe. J Pipeline Syst Eng Pract. 2012;3(2):47-54. doi:10.1061/(asce)ps.1949-1204.0000089
    CrossRef
  12. Borda C, DuToit D, Duncan H, Nikles M. External pipeline leak detection based on fiber optic sensing for the kinosis 12"-16" and 16"-20" pipe-in-pipe system. Proc Bienn Int Pipeline Conf IPC. 2014;1. doi:10.1115/IPC201433375
    CrossRef
  13. Gupta SP, Pandey UK. Automatic and intelligent integrated system for leakage detection in pipes for water distribution network using internet of things. Smart Innov Syst Technol. 2018;83(Ictis 2017):516-523. doi:10.1007/978-3-319-63673-3_62
    CrossRef
  14. Srihari MM. Intelligent Water Distribution and Management System Using Internet of Things. Proc Int Conf Inven Res Comput Appl ICIRCA 2018. 2018;(Icirca):785-789. doi:10.1109/ICIRCA.2018.8597325
    CrossRef
  15. Roy U. Leak Detection in Pipe Networks Using Hybrid ANN Method. Water Conserv Sci Eng. 2017;2(4):145-152. doi:10.1007/s41101-017-0035-1
    CrossRef
  16. Porwal S, Akbar SA, Jain SC. Leakage detection and prediction of location in a smart water grid using SVM classification. 2017 Int Conf Energy, Commun Data Anal Soft Comput ICECDS 2017. Published online 2018:3288-3292. doi:10.1109/ICECDS.2017.8390067
    CrossRef
  17. Rathi S, Gupta R. Sensor placement methods for contamination detection in water distribution networks: A review. Procedia Eng. 2014;89:181-188. doi:10.1016/j.proeng.2014.11.175
    CrossRef
  18. Mohanasundaram S V., Joyce A, Sri Naresh K, et al. Smart water distribution network solution for smart cities: Indian scenario. 2018 Glob Internet Things Summit, GIoTS 2018. 2018;(4):1-6. doi:10.1109/GIOTS.2018.8534524
    CrossRef
  19. Adsul S, Sharma AK, Mevekari RG. Development of leakage detection system. In: 2016 International Conference on Automatic Control and Dynamic Optimization Techniques (ICACDOT). ; 2016:673-677. doi:10.1109/ICACDOT.2016.7877671
    CrossRef
  20. Mujawar DT. WIRELESS SENSOR NETWORK SYSTEM: GAS LEAKAGE DETECTION AND MONITORING. IJCR. 2015;Vol. 7,:18445-18450.
  21. Vasantrao KS. WSN Based water pipeline leakage detection. 2017 Int Conf Comput Commun Control Autom. Published online 2017:1-5. doi:10.1109/ICCUBEA.2017.8463752
    CrossRef
  22. Moulik S, Majumdar S, Pal V, Thakran Y. Water Leakage Detection in Hilly Region PVC Pipes using Wireless Sensors and Machine Learning. 2020 IEEE Int Conf Consum Electron - Taiwan, ICCE-Taiwan 2020. 2020;(September). doi:10.1109/ICCE-Taiwan49838.2020.9258144
    CrossRef
  23. Thilagaraj M, Akkara S, M AH, Manikandan T, Rajmohan M, Yuvaraj P. Water Leakage Detection and Management System Using IOT. 2020;29(9):683-689.